The Raspberry Pi implemention is not yet available but is coming very soon.

Raspberry Pi Setup Guide

This is a detailed step-by-step guide to setting up the Signital app on your Raspberry Pi device.

Table of Contents

• Prerequisites
• Installation Steps
  • Step 1: Prepare Your Raspberry Pi
  • Step 2: Download and Flash the Signital Image
  • Step 3: Launch and Configure
• Troubleshooting
• FAQs
• Support

Prerequisites

Before you begin, ensure you have:

• A Raspberry Pi device (Raspberry Pi 3 Model B or newer recommended).
• A microSD card (minimum 8GB recommended).
• A monitor or display connected to the Raspberry Pi.
• A keyboard and mouse (optional but helpful for setup).
• An active Signital account (opens in a new tab).
• A stable internet connection for your Raspberry Pi.

Installation Steps

Step 1: Prepare Your Raspberry Pi

• Ensure your Raspberry Pi is powered off.
• Have your microSD card ready.

Step 2: Download and Flash the Signital Image

1. Download the Signital Raspberry Pi Image:

   • On your computer, download the Signital Raspberry Pi image (opens in a new tab).

2. Download and Install Etcher:

   • Download Etcher from balenaEtcher official website (opens in a new tab).
   • Install Etcher on your computer.

3. Flash the Image to the microSD Card:

   • Insert your microSD card into your computer using a card reader.
   • Open Etcher.
   • Click Flash from file and select the Signital Raspberry Pi image you downloaded.
   • Select your microSD card as the target device.
   • Click Flash! to begin the process.
   • Wait for the flashing process to complete and safely eject the microSD card.

4. Insert the microSD Card into Raspberry Pi:

   • Insert the microSD card into the Raspberry Pi's card slot.

Step 3: Launch and Configure

1. Power On the Raspberry Pi:

   • Connect the Raspberry Pi to a power source.
   • The device will boot up automatically.

2. Connect to the Internet:

   • Ethernet: Ensure the network cable is connected.
   • Wi-Fi:
     • The Signital image will prompt you to select a Wi-Fi network.
     • Choose your network and enter the password.

3. Display the 6-Digit Code:

   • After booting, the Signital app will start automatically and display a 6-digit code on the screen.

4. Connect the Device to Your Signital Account:

   • If you have already created a display:
     • Go to your Displays page (opens in a new tab) and select the display.
     • Click the Connect button.
   • If you have not created a display:
     • Go to the Displays page (opens in a new tab).
     • Click Create New Display, fill in the details and create the display, and then click Connect.

5. In the Connect Dialog:

   • Select the Raspberry Pi option.
   • Enter the 6-digit code displayed on your device.
   • Click Connect.

6. Complete Setup:

   • Your Raspberry Pi is now connected to your Signital display.
   • The content assigned to the display will start showing on your screen.

Troubleshooting

• Signital App Doesn't Start:

  • Ensure the microSD card was flashed correctly.
  • Try re-flashing the image to the microSD card.

• No Display or Black Screen:

  • Check HDMI connections and ensure the display is turned on.
  • Verify that the Raspberry Pi is receiving power.

• No Internet Connection:

  • Reconfigure your network settings.
  • For Wi-Fi, ensure you're connected to the correct network and the password is correct.

• 6-Digit Code Not Displayed:

  • Restart the Raspberry Pi.
  • Check your internet connection.

FAQs

Q: Which Raspberry Pi models are compatible with Signital?

A: We recommend using Raspberry Pi 3 Model B or newer for optimal performance.

Q: Can I use the Raspberry Pi for other tasks while running Signital?

A: It's best to dedicate the Raspberry Pi to Signital for uninterrupted performance.

Q: Is an internet connection required at all times?

A: Yes, an active internet connection is necessary for content updates and communication with the Signital portal.

Support

If you need assistance, please contact our Support Team.